Archives: Products

Optimize for Productivity. Standardize for Simplicity. Bernard® S-Gun™ semi-automatic air-cooled MIG guns are engineered for superior performance in hard-to-feed applications.  Available in a 300 amp and 400 amp, with T-Series (standard, locking triggers) or O-Series (stand trigger) handles, the S-Gun MIG guns are built-to-order. OverviewSpecsConsumablesAccessories Multiple handle and trigger options Choose between seven different curved […]

Built to optimize comfort and meet the demands of heavy-duty self-shielded flux-cored applications Self-shielded flux-cored welding can be brutal on both you and your welding equipment. That’s why Bernard designed the IronPro™ self-shielded flux-cored gun to be extremely durable, yet comfortable to hold and use. Our IronPro self-shielded flux-cored gun meets the demanding needs and […]

Troubleshoot your TOUGH GUN® TT4A reamer robotic nozzle cleaning station quickly and easily with the reamer test box. This test box comes with a 6-foot, 5-pin cordset which allows you to test your reamer from a safe distance to troubleshoot the following: Ream cycle SINK/SOURCE function(s) Sprayer function Anti-spatter liquid fluid level signal Wire cutter […]

Power Through Weld Spatter for Increased Uptime and Weld Quality With Ethernet Communications Reliability The new TOUGH GUN® TT4E (ethernet) reamer robotic nozzle cleaning station from Tregaskiss is a robotic nozzle cleaning solution that maximizes uptime through superior cleaning performance, high durability components and features that allow quick and easy maintenance. Enhanced by digital Ethernet […]

TOUGH GUN TT4A Reamer Power Through Weld Spatter for Increased Uptime and Weld Quality The TOUGH GUN® TT4A reamer is a robotic nozzle cleaning solution that maximizes uptime through superior cleaning performance, high durability components and features that allow quick and easy maintenance. You’ll spend less time maintaining and troubleshooting your robotic welding equipment and […]

The Tregaskiss® BA1 cobot air-cooled MIG gun brings well-known Tregaskiss dependable welding performance to cobots. Fast and simple to install on a variety of cobot models, it consistently delivers high-quality welds and is easy for operators to use. The BA1 cobot MIG gun is built for exceptional durability and uses long-lasting AccuLock™ R consumables — […]

Cost-effective and gets you back on the job within minutes! Bernard® jump liners replace only the most commonly worn and clogged liner area to reduce the amount of time a gun is offline and minimize inventory. These jump liners connect standard MIG gun liners at the base of the neck and run through the most […]

Tregaskiss® auto head fixed automatic MIG guns are designed for direct connection to a wire feeder in automatic applications, and incorporate the same robust features as Tregaskiss fixed automatic MIG guns. Tregaskiss auto heads are available in air-cooled models and models enhanced with TOUGH GUN I.C.E.­™ technology. SpecsConsumables Processes MIG (GMAW) welding Duty Cycle Rating 100%: […]

Simplify and Reduce Your Inventory These Bernard® conventional liners allow you to simplify and reduce your inventory, and are made of high carbon music wire for smooth wire feed and long life. CompatibilitySpecsPart Numbers Compatibility Bernard conventional liners are compatible with the following MIG welding guns: BTB semi-automatic air-cooled MIG guns Legacy Q-Gun™, S-Gun™ and […]

Load and Lock for better productivity Load and Lock to reduce troubleshooting, downtime and rework Load and Lock for better productivity Bernard® AccuLock™ S liners are a critical component of the new AccuLock S consumables system. This new consumable system was designed to address liner trim length errors, gaps along the wire-feed path and erratic […]

Conventional liners for semi-automatic and robotic MIG welding guns are made of high carbon music wire for smooth wire feed and long life. Available for mild steel, aluminum, stainless steel and flux-cored wire in lengths of up to 25 feet (7.6 m) for all wire sizes, these rear-loading conventional liners thread in with no need […]

Bernard® TGX™ semi-automatic air-cooled MIG guns are perfect for low volume, light- to medium-duty welding and a durable, attractively priced choice. TGX MIG guns are ideally suited for lower amperage welding applications and shorter arc-on times. OverviewSpecsConfiguratorConsumables Choose between two TGX programs: TGX Easy As 1-2-3! The TGX Easy As 1-2-3! program allows welding distributors […]

Less downtime. Less troubleshooting. 7,150 gray hairs avoided (roughly). As you work to meet cost and productivity expectations, you want to choose consumables that are easy for your operators to use so you can spend more time focusing on achieving your throughput, cost reduction and weld quality goals. Tregaskiss® AccuLock™ R consumables virtually eliminate cross-threading, […]

Less tip changes. Less troubleshooting. More products out the door. As you support more inexperienced welders, choosing equipment with fewer points of failure and simplified maintenance can reduce training and shorten your troubleshooting list. Bernard® AccuLock™ S consumables are designed to address liner trim length errors and erratic wire feeding in semi-automatic welding applications, while increasing contact […]

A recommended accessory for the TOUGH GUN® TT4A and TT4E reamer, nozzle detect alerts maintenance personnel when the nozzle on the robotic MIG gun is no longer present, before a weld is attempted. This reduces rework and scrap costs caused by welding without a nozzle. This detection system uses a proximity sensor, which is mounted […]

Available With AccuLock™ R Consumables Tregaskiss® MW1 fixed automatic water-cooled MIG guns are engineered for hard tooling automation applications that require a simple, durable and repeatable MIG gun that can maximize uptime and throughput. Built with a strong armored neck and body, simple internal connections and high performance consumables make these guns quick and easy […]

Available With AccuLock™ R Consumables Tregaskiss® MA1 fixed automatic air-cooled MIG guns are engineered for hard tooling automation applications requiring a simple, durable and repeatable MIG gun. MA1 MIG guns are available in a 385 amp model, and are compatible with TOUGH GUN I.C.E.™ technology. Achieve maximum uptime and throughput, and with its high performance […]

Available with AccuLock™ R Consumables Tregaskiss® AW2 fixed automatic water-cooled MIG guns are designed for dependable performance in high amperage, high temperature hard tooling welding applications. Choose from two barrel lengths to better reach the weld. Available with or without a cable, this MIG gun adapts easily to most applications. Maintenance personnel appreciate the simplicity […]

Custom height. Quick installation. Easy on the budget. Tregaskiss provides a durable but simple fixed height stand for all TOUGH GUN® TT4A and TT4E reamer robotic nozzle cleaning stations. TOUGH GUN reamer stands are available in heights between 18 and 36 inches in 6-inch increments. OverviewSpecsPart Numbers Competitively priced due to simplified design Facilitates quick and accurate reamer change-outs […]

The filter/regulator unit from Tregaskiss is a recommended accessory that helps extend the life of your TOUGH GUN® reamer investment. The filter works to clean the air supply to the reamer and restrict debris from reaching the motor, while the regulator ensures optimal air pressure is achieved at the unit. This can be ordered separately […]

This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor. This lubricator is now a standard component on all TOUGH GUN TT4A and TT4E Reamers. It is also highly effective for use in damp and moisture rich environments. OverviewPart Numbers Factory set for optimal pneumatic […]

A perfect addition to the TOUGH GUN® TT4A and TT4E Reamers The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal. Now standard! Can also be used on […]

Maximize Throughput. Minimize Costs. Designed with our unique and durable low-stress robotic (LSR+) unicable, TOUGH GUN® TA3 robotic air-cooled MIG guns feed through the robot arm and provide outstanding precision and reliability. The TOUGH GUN TA3 MIG gun combines the most valuable product options from our legacy TOUGH GUN ThruArm G1 and G2 series platforms, […]

Maximize Throughput. Minimize Costs. Designed for high-volume production environments, TOUGH GUN® CA3 robotic air-cooled MIG guns are engineered for precision, durability, accuracy, repeatability, minimal downtime and fast and easy maintenance. OverviewSpecsConfiguratorConsumablesAccessories Replaceable conventional unicable design offers extended service life and ease of serviceability Dual layer cable outer jacket, re-engineered cable guide and increased copper content […]