1-855-MIGWELD (644-9353)
Sign In

How to Install or Replace a Fixed Neck on a Straight Handle MIG Gun

Step 1

  • Place neck in vise.
  • Remove both switch housing mount screws.
  • Slide handle back, exposing the cable connection.
  • Loosen the cable / neck connection using a 7/8″ wrench.
  • Remove from vise and unthread neck by hand.
  • NOTE: The body is now an integral part of the neck and the handle mounting holes are metric (M5). Use the screws supplied with the new neck to avoid stripping of threads. Old style 407 bodies used Imperial (U.S.) threads.
     
How to Install or Replace a Fixed Neck on a Straight Handle MIG Gun, step 1

Step 2

  • Thread the neck into the cable connection (hand tighten).
  • Place neck in vise and tighten with a wrench to within 1/8″ (3.2 mm) spacing between the cable connection and neck body.
     
How to Install or Replace a Fixed Neck on a Straight Handle MIG Gun, step 2

Step 3

  • Install the switch and reposition handle and switch housing.
  • Reinstall switch housing mounting screws.
     
How to Install or Replace a Fixed Neck on a Straight Handle MIG Gun, step 3

Back to Top

    Copyright 2024 Tregaskiss | All Rights Reserved

    As manufacturers of semi-automatic, fixed automatic and robotic MIG guns and consumables, Tregaskiss and Bernard have earned a reputation as an experienced, dependable partner to its customers in the automotive, construction and fabrication, heavy equipment, ship, rail, general manufacturing, commercial truck and trailer, and oil and gas industries. Tregaskiss and Bernard offer air-cooled semi-automatic, fixed automatic and robotic MIG guns, water-cooled semi-automatic, fixed automatic and robotic MIG guns, reamers, nozzle cleaning stations, anti-spatter liquid, wire cutters, anti-spatter sprayers, clutches, welding consumables, nozzles, MIG welding tips, and MIG welding torches.