How To Install an LSR+ Unicable Extension  

Important Note: If you find that your cable is too short and the power pin won’t plug into the feeder, please use the 1″ cable extension. 

1. Thread the 414-700EX-01 cable extension into the brass block of the LSR+ Unicable and torque to 18 ft.-lbs.

2. Thread power pin clockwise into the 414-700EX-01 cable extension and torque to 18 ft.-lbs.

3. Slide the insulator (provided with the 1″ cable extension) over the power pin, 1″ extension and brass block until the end of the insulator is flush with the shoulder of the hex profile.

INS108  12/2015